Publicidad
Idiomas disponibles
Idiomas disponibles
CONTINUOUS OPERATION
The tool has the lock button. For continuous operation, pull
the trigger, press the lock button.
To release lock button, pull the trigger to the bottom and
then release.
Pull trigger.
Continuous operation mode.
Note: Even with the trigger on and the motor running,the
bit does not rotate.Apply press on tool to engage the clutch.
GENERAL SAFETY RULES
WARNING!
Read all instructions. Failure to comply with these instruc-
tions listed below may result in electric shock, fire and/or
serious injury. The term "power tool" in all of the warnings
listed below refers to your live (corded) or battery-powered
(cordless) power tool.
SAVE THESE INSTRUCTIONS
DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to safety rules for
the subject product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause serious
personal injury.
1 Work area
1) Keep the work area clean and well lit. Untidy or dark
areas cause accidents.
2) Do not use in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools
create sparks that can ignite dust or fumes.
3) Keep children and bystanders away during use. Distrac-
tions can cause you to lose control.
2 Electrical Safety
1) Never modify the plug. Do not use adapters. Unmodified
plugs and corresponding sockets will reduce the risk of
electric shock.
2) Avoid contact of the body with grounded surfaces, such
as pipes, radiators, cookers and refrigerators. There is an
increased risk.
3) Do not expose power tools to rain or wet conditions. Wa-
ter will increase the risk of electric shock.
4) Never use the cord to carry, pull or unplug the power
tool. Keep cord away from heat, oil, sharp edges, or mo-
ving parts. Damaged or tangled cords increase the risk of
electric shock.
5) When using a power tool outdoors, use an appropriate
extension cord. Use of an outdoor power tool cord reduces
the risk of electric shock.
6) If use of a power tool in a wet location is unavoidable,
use a RCD protected supply. The use of an RCD reduces the
risk of electric shock.
Press lock button
3 Personal Safety
1) Stay alert and use common sense. Do not use while tired
or under the influence of drugs, alcohol or medication. A
moment of inattention in its use can cause serious per-
sonal injury.
2) Always wear eye protection such as dust mask, non-slip
safety shoes, helmet or hearing protection. Proper equip-
Switch off mode.
ment will reduce personal injury.
3) Make sure the switch is in the off position. Carrying
power tools with your finger on the trigger or plugging them
in directly invites accidents.
4) Remove any adjusting key before turning the power tool
on. A spanner left attached to a rotating part of the power
tool can cause personal injury.
5) Maintain posture and balance at all times. This allows
better control of the power tool in unexpected situations.
6) Dress appropriately. Do not wear inappropriate clothing
or jewellery. Keep your hair, clothing, and gloves away from
moving parts. Loose clothing, jewellery or long hair can get
caught in moving parts.
7) If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure that they are connected
and used correctly. The use of these devices can reduce the
risks related to dust.
4 Electric tool, use with care
1) Do not force the tool. Use only for your application. The
right power tool will do the job better and safer at the right
speed.
2) Do not use the tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
3) Disconnect from power source and/or remove battery
pack before making any adjustments, changing acces-
sories or storing power tools. Such preventive safety mea-
sures reduce the risk of starting the power tool accidentally.
4) Store power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these ins-
tructions to use it. Power tools are dangerous in the hands
of untrained users.
5) Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may affect
operation. If damaged, it must be repaired before use.
Many accidents are caused by poor maintenance.
6) Properly maintained cutting tools with sharp cutting ed-
ges are easier to control.
5
EN
Publicidad
