Understanding The Control Board - Pit Boss PLATINUM LAREDO 1000 PB1000PL Manual De Instrucciones

UNDERSTANDING THE CONTROL BOARD

This P.I.D. (proportional-integral-derivative) digital Control Board is very much the same as the controls on your kitchen oven. The
main advantages are the ability to automatically compensate for the different ambient conditions and fuel types.
IMPORTANT: The temperature inside of any grill will vary greatly from location to location. Even instruments
calibrated together may not agree with each other.
PRIME
CONTROL
DESCRIPTION
Press this button once to Power On the unit. This will begin the automatic start-up cycle. Press and hold
this button for three seconds to Power-down the unit, activating the automatic cool-down cycle. The
button will flash white when connected to a power source, and light up solid white when the unit is on.
Press this button to switch on and off the light inside the grill barrel.
The Temperature Switch Button is to change the temperature readout. Press the button to switch
between Celsius (ºC) and Fahrenheit (ºF), as preferred. Default is set to Fahrenheit.
The Pit Boss® Grills icon indicates a connectivity with Wi-Fi. When searching for a connection by Wi-Fi
or via Bluetooth®, the Pit Boss® Grills icon will blink. Once a Wi-Fi connection has been established,
PRIME
the Pit Boss® Grills icon will stay solid. When connected, get live updates about the actual and set
PRIME
temperatures of the grill, cooking time, and meat probe temperatures. It also allows you to adjust the
settings of your Control Board.
Press and hold this button to activate a manual continuous feeding of pellets to the burn pot. Releasing
the button will stop the manual feeding of pellets. This can be used to add more fuel to the fire before
PRIME
opening the barrel lid, resulting in a quick heat recovery. It can also be used while smoking, to increase
the intensity of clean smoke flavor. This feature was requested from competition cookers.
The Controller Knob is used to increase, decrease, and select a setting value. Rotate the Controller Knob
to select the temperature in an active settings menu. Push the Controller Knob to confirm the chosen
value.
PRIME
PRIME
PROBE 1 PROBE 2
PRIME
PROBE 1
PROBE 1
ACT
SET
NO PELLETS
PROBE 1
ACT
SET
ACT
SET
PROBE 1 PROBE 2
PROBE 2
ACT
SET
NO PELLETS
PROBE 2
PROBE 1
PROBE 1
PROBE 2
NO PELLETS
NO PELLETS
ACT
SET
ACT
SET
ACT
PROBE 2
SET
PROBE 2
NO PELLETS
NO PELL
NO PELL
15