Infiniton PG-R02 Manual De Instrucciones página 28

STEP 4
4-1. Remove the 4 bolts from the burner.
4-2. Put the gas hose through into the post.
4-3. Fix the burner unit to the post by the 4 bolts.
STEP 5
5-1. Check whether the connection of vertical post and burner are
assembled according to instructions, and all bolts and nuts are
tightened.
5-2. Put 6 pcs Large Flat Washers
STEP 6
Fasten the reflector with 3 pcs Large Flat Washers and 3 pcs Wing Nuts.
on 3 Reflector Spacers.
- 9 -
STEP 4
Bolt
STEP 5
Reflector Spacer
STEP 6
Wing nut
Reflector