Publicidad
Idiomas disponibles
Idiomas disponibles
5
2
X2
2
2
7
X1
2
X2
1
6
X1
6
1
2
6
2
X2
2
2
8
6
X1
2
X7
2
2
2
2
2
6
6
6
STACKING THE ROOMS
The rooms can be stacked in di erent ways to create
di erent con gurations. To keep the levels and rooms
secured, you will need the stabilizer connectors and
the plugs with locks. Follow the directions below:
1
Place the Stabilizer Connectors
The stabilizer connectors are needed to keep the rooms
stable. Each room has an indent on the ceiling where the
stabilizer connector will lay on. Place a connector before
stacking a room by inserting it into the indent and making
2
sure the openings align (Fig. 1).
2
Insert the Plugs and Locks
The locks and plugs are needed to keep the levels locked together.
Stack a room over another, aligning the openings. Then, lock the
levels together by placing the lock into the openings and inserting
the plugs into the locks (Fig. 2).
To remove the locks and create a di erent con guration, hold
down the rim of the lock with one hand and use the other hand to
push up the plug from the bottom so it pops out (Fig. 3). Then, pull
out the lock from the top.
PLUG
STABILIZER
CONNECTOR
LOCK
FIG. 1
2
1
1
FIG. 2
FIG. 3
11
ENG
2
Publicidad
