Manuales relacionados para Truper CLNE-16
Resumen de contenidos para Truper CLNE-16
- Página 1 Manual Pneumatic brad nailer Applies for: Code Model 13181 CLNE-16 CLNE-16 WARNING Constant lubrication. Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Warranty policy Use and care recommendations Do not operate without lubrication (it is recommended to use the Truper lubricating filter 19238 UNI-LL-1/4). Use only in WOOD. Work at the INDICATED PRESSURE to prevent the nail from cloging. In case this happens REMOVE THE STAPLE before continuing working. -
Página 3: Technical Data
Technical data CLNE-16 Code 13181 Description Pneumatic brad nailer Recommended Operation Pressure 75 PSI - 110 PSI Maximum Pressure Allowed 110 PSI Cartridge Capacity 100 nails Nail Gauge Nail Length 1” to 2-1/2” Air Intake Connection 1/4 NPT Hose Inner Diameter 3/8”... -
Página 4: Safety Warnings For Pneumatic Tools
Safety warnings for pneumatic tools Keep your work area clean, tidy and well lit. Disconnect the air hose from the tool before servicing or changing accessories. CAUTION Cluttered and dark areas can cause accidents. CAUTION To prevent the tool from accidentally start and cause Never use the tool in explosive environments or in the accidents. -
Página 5: Risk Control When Using Pneumatic Tools
Risk control when using pneumatic tools Injury risk to head and eyes Prevent injury to head and eyes WARNING • Compressed air used with pneumatic • When operating pneumatic equipment wear tools may be dangerous. Objects like vices, burr, splinters, protecting eyeglasses complying with ANSI Z87.1 dust and other residues can get shot out at great speed Standard. -
Página 6: Safety Warnings For Using Brad Nailers
Safety warnings for using air nailers Before using the nailer How to verify the correct use of the lock • To prevent possible injuries, the operator and any other • The tool is built with a contact lock to prevent an person in the work area shall wear safety glasses with side accidental shot. -
Página 7: Parts
Parts Outlet Handle intake Trigger Depth Regulator Cartridge lock Contact lock Nails cartridge Start Up Cartridge Loading The pneumatic tool must not be connected to the air supply, to prevent it from being CAUTION accidentally triggered during the process. • Push back the cartridge lock (A) until it is secured at the end of the cartridge. - Página 8 Start Up Operation • Turn on the compressor and fill it. • Having your finger away from the trigger position the tool • Regulate the air compressor output pressure to 75 PSI and and press the contact lock against the surface to be used (A). 110 PSI •...
-
Página 9: Maintenance
Start Up Blocked nail in the shooting orifice • Disconnect the tool from the air supply. • Open the nozzle (D) and pull the nail using pliers until removed (E). Blocked nail in the cartridge • Disconnect the tool from the air supply. •... -
Página 10: Troubleshooting
Troubleshooting Problem Cause Solution Air leak in the upper • Loose screws. • Fasten all the screws. side of the tool or in • Worn ”O”-rings or damaged seals. • Go to a Authorized Service the trigger area. Center to replace the parts. The tool is not •... -
Página 11: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS... -
Página 12: Warranty Policy
It includes the costs of transportation of the product that derive from its fulfillment of its service network. . Phone number 800-018-7873. Made in China. Imported by Truper, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100.