Hama 00176570 Instrucciones De Uso página 4

7.1 Connecting via the Apple Home app
(00176626)
• Open the Apple Home app and click on "Add
device".
• Press and hold the button on the socket for
approx. 5 seconds until the LED starts to ash
quickly.
• Scan the QR code on the side of the socket.
• Once the code has been recognised, select
"Add to home". When doing this, ensure that
the socket is in pairing mode and the LED is
ashing quickly.
• Once the socket has been added, you can then
con gure it in the app (location, name, display)
and then close the setup.
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com ð Article Number ð Downloads
ð App Operating Instructions
4
8. Care and maintenance
Note
Disconnect the product from the mains before
cleaning and during prolonged periods of
non-use.
• Only clean this product using a lint-free, slightly
damp cloth and do not use any harsh cleaners.
• Ensure that no water is able to enter the product.
9. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provi-
des no warranty for damage resulting from improper
installation/mounting, improper use of the product
or from failure to observe the operating instructions
and/or safety notes.
10. RF exposure information
This device complies with the EU requirements
for limiting the exposure of the general public to
electromagnetic elds by means of health protection.
The device complies with RF speci cations provided
it is used 20 cm away from the body.
11. Declaration of conformity
Hama GmbH & Co KG hereby
declares that the radio equipment
type [00176570, 00176571,
00176573, 00176574, 00176575,
00176594, 00176612, 00176626, 00176627] is in
compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the
following Internet address:
www.hama.com -> 00176570, 00176571,
00176573, 00176574, 00176575, 00176594,
00176612, 00176626, 00176627 -> Downloads.