Extra Rinse; Water Plus; Rinse+Spin; Signal - LG WT7050CV Manual Del Propietário

All manuals and user guides at all-guides.com

EXTRA RINSE

This option will add an extra rinse to the selected cycle.
Use this option to help ensure the removal of detergent
or bleach residue from fabrics. Liquid fabric softener, if
used, is always dispensed in the final rinse.
NOTE: You cannot select the Extra Rinse option with
the Spin Only option and Tub Clean cycle.

WATER PLUS

Use this option to add extra water to the wash cycle for
better wash performance and stain treatment of large or
bulky items.
NOTE:
y If the washing machine reaches its maximum water
level, the WATER PLUS button will have no effect.
y The Water Plus option can only be selected or
deselected while the cycle is running.
y Once the Water Plus option has been added to a
cycle, it is saved as a default option on that cycle
until you deselect it.
y To deselect the option, press WATER PLUS after
starting the cycle.
Adding the Water Plus Option to a Cycle
1. While the cycle is running, press START/PAUSE to
pause the cycle
2. Press WATER PLUS to add Water Plus as a default
option for that cycle.
3. Press START/PAUSE to resume the cycle.
RINSE + SPIN
Select this option to rinse and spin a load separetely
from a regular cycle. This can be helpful in preventing
fresh stains from setting in fabrics. You can change the
spin speed by pressing the SPIN button.
1. Press the POWER button to turn on the washer.
2. Press and hold the TUB CLEAN button for 3
seconds.
3. Press the SPIN button to select the desired spin
speed. Selecting NO SPIN is not allowed.
4. Press the START/PAUSE button

SIGNAL

The washing machine plays a melody when the wash
cycle has finished. The volume of the melody is
adjusted using the SIGNAL button.
Press the SOIL button repeatedly to adjust the volume
of the signal. When no signal is heard, the signal is off.
The volume settings are ON– OFF. The signal volume
can be adjusted at any time as long as the washer is
turned ON.

CONTROL LOCK

Use this option to disable the controls. This feature can
prevent children from changing cycles or operating the
machine. Once the CONTROL LOCK is set, it must be
deactivated before any controls, except the POWER
button, can be used. Once the washer has shut off,
the POWER button will allow the machine to be turned
ON, but the controls will still be locked. When the
controls are locked, CL will display alternately with the
estimated time remaining.
Press and hold the SPIN button for 3 seconds to
activate or deactivate CONTROL LOCK.
NOTE: Once the controls are locked, they must be
manually unlocked to restore operation.

ADD GARMENTS

Laundry may ONLY be added to the load at the
proper time in the wash cycle. When the Add
Garments light is illuminated, it is safe to pause the
cycle and add more items to the load. If garments
are added when the Add Garments light is off, the
washer will not adjust for these items which could
result in poor performance and/or fabric damage.
1. Press the START/PAUSE button to pause the
washer.
2. Open the lid after it unlocks.
3. Add your additional items.
4. Close the lid.
5. Press the START/PAUSE button. The cycle will
resume after the lid locks.
NOTE:
y The ADD GARMENTS light is an indicator only
and is not selected by pressing the SPECIAL USE
button.
y If the washer remains idle for 4 minutes after
pausing the cycle, the water in the tub will drain.
25
HOW TO USE