Using The Appliance - Demeliss SAINT ALGUE TITANIUM V2.0 SA-2202 Manual De Instrucciones

— Use the supplied water filling dropper to avoid water leakage.
— Refit the cover and ensure it is attached properly in position.
— Wipe the water tank with a dry soft cloth.
— Re-assemble the water tank onto the main body and ensure it is correctly
engaged in position.
— Wait for approx. 90 seconds before starting to use the appliance.

Using the appliance

NOTE: Always use the appliance in a correct way; ensure the steam diffusor and
comb towards the hair tips.
NOTE: The appliance is equipped with steam function. After the appliance is
switched on, the water in the water tank starts to preheat automatically. The
symbol flashes on the display. The preheat takes approx. 60 seconds. Do not
clamp the heating plates during preheat process. After the preheat is finished, the
symbol is constantly indicated on the display. Keep pressing the "+" button
for approx. 3 seconds to unlock the buttons and then press the on/off & steam
button once to turn off the steam function; press the on/off & steam button
again to turn on the steam function.
NOTE: To use the steam function, fully clamp the heating plates to each other
and the steam diffusor outputs the steam automatically for approx. 7 - 8 seconds.
Release the heating plates and wait for approx. 2 - 3 seconds to preheat the water
in the water tank for the next use.
NOTE: The display indicates «SLP», if the appliance is not operated within 20
minutes, after it has been switched on.
NOTE: The comb is removable. Ensure the appliance is switched off, disconnected
from power supply and completely cooled down before removing the comb.
— Connect the appliance to the power supply. The display shows "OFF".
— Keep pressing the on/off & steam button for approx. 2 - 3 seconds to switch
on the appliance.
— Press the "+" and "-" buttons to select the desired heating temperature
(150 °C / 170 °C / 190 °C / 210 °C / 230 °C).
— The temperature of the heating plates starts to increase instantly. The
increasing temperature is indicated on the display.
— If no operation after the appliance is switched on / the temperature is set, the
buttons will be locked automatically in approx. 4 - 5 seconds. The symbol
indicated on the display. Keep pressing the "+" button for approx. 3 seconds
to unlock the buttons. The symbol
display.
— After the heating plates reach the set temperature, the temperature will be
constantly indicated on the display.
— Hold the appliance on the gripping surface, clamp a strand of hair between the
heating plates and slowly move the appliance down towards the tips of your
hair. Make sure not to press the heating plates on your hair for too long.
— When the operation is finished, keep pressing the on/off & steam button for
approx. 2 - 3 seconds to switch off the appliance.
— Disconnect the appliance from the power supply. Place it on a heat-resistant
surface to let it cool down.
— Before cleaning, unplug the appliance and let it cool down completely.
— Do not clean the appliance with steel wool, strong chemicals, alkali, abrasive or
disinfecting agents as they may damage its surface.
— Do not immerse the appliance in water or other liquids to clean it. Make sure
that the electrical parts do not become wet or damp.
— Remove any hair left on the appliance, comb and heating plates.
— Clean the appliance with a soft damp cloth and, if necessary, a little mild
detergent. Wipe with a dry soft cloth.
— Remove the comb from the main body.
— Slide the water tank towards the power cord to remove it from the main body.
Drain out the remaining water in the water tank.
flashes and then disappears from the
CLEANING
8
is