MSI EC14H Manual Del Operador página 10

Ethernet to Powerline HomePlug Adapter
Testing the Connection
You can use Windows standard Ping utility to verify if your powerline
connection is set up properly.
1. Click Start at the taskbar and select Run; then, type
in the Open box and click OK.
2. Type
prompted DOS command
window and and press
[Enter].
3. It will display the IP address of your PC to which MSI EC14H
is attached, along with Subnet Mask and Gateway address.
4. Enter the command
where
1 0
All manuals and user guides at all-guides.com
ipconfig in the
"ping
IPADDRESS is the one found in preceding step.
IPADDRESS" and press [Enter],
If the Ping succeeds, it shows the set
up is correctly done. Then, repeat the
same process with other powerline
devices on the network. If this Ping
fails, it means there is a problem with
the set-up.
command