Duramaxx Eyeview IP Manual Del Usuario página 19

EN
INSTALLATION AND APP DOWNLOAD
Connect the device to an adequate power source using the supplied USB
cable: Use a computer USB port or a 5 V USB power adapter available at
electronics retailers. It takes about a minute for the blue LED to start flashing.
Then the camera is ready and you can proceed with the IP connection.
If the camera does not start up, press and hold the reset button on the back
with a thin object (e.g. a paper clip) for 5 seconds to restart the device (see
image):
Scan the QR code below to download the associated app.
iOS Android
19