AIC -30 Manual De Instrucciones página 26

SNOOZE
1. When the alarm goes off, the corresponding Alarm 1 or Alarm 2 indicator
will flash on the display.
2. Press the DIMMER/SNOOZE button to temporarily deactivate it. The snooze
function will extend your alarm in increments of 9 minutes.
3. The corresponding Alarm 1 or Alarm 2 indicator will flash on the display
during the snooze period.
4. To cancel the snooze and the alarm, press AL OFF button.
TO STOP THE ALARM WHEN ALARM GOES OFF
1. Press AL OFF button to stop the alarm.
2. Alarm indicator will still stay on and the alarm will go off the next day you
set.
TO DISABLE THE ALARM
1. Press AL 1 button repeatedly to disable Alarm 1 while the alarm is not
going off. Press AL 2 button repeatedly to disable Alarm 2 while the alarm
is not going off.
2. Corresponding alarm indicator will be off and the alarm will not go off until
you enable it again.
DISPLAY DIMMER
1. Press the DIMMER/SNOOZE button to change the brightness level of the
display: 100%>75%>50%>25%>Off
2. Default setting of the dimmer level is "100%".
QI WIRELESS CHARGING
1. Place your Qi enabled smartphone on the center of the wireless charging
pad.
2. Please check if your phone screen shows charging status
If your phone is not charging;
-Check if your device supports Qi wireless charging
-Place mobile device in center
-Remove the case with magnet, metal, or thicker material than 0.12''(3mm)
3. Charges through most cases of Polycarbonate (PC) or Thermoplastic
Polyurethane (TPU) material up to 0.12''(3mm)
4. Compatibility (Qi Wireless Charging Pad)
iPhone 13/13Pro, iPhone 12/12Pro, iPhone 11/11Pro, iPhone X, iPhone 8/8
Plus, Samsung Galaxy Note 8/5, Galaxy S9/S9+/S8/S8+, S7/S7 Edge, S6
Edge+,S6/S6 Edge, LG V30, Nexus 7/6/5, other Qi enable
smartphones/tablets and accessories
Note: The Wireless charging indicator will be on while the unit is charging .