D-Link DHP-601AV Guía De Instalación Rápida página 3

SETUP HARDWARE INSTALLATION
1
Plug one of the Powerline adapters into a wall outlet near your router.
/ Connect the Ethernet cable to a LAN port on your router, and connect the
other end of the cable to your Powerline.
2
Wait for the Power LED of the Powerline to light up green.
/
Note: You may need to refer to the User Manual for device specific LED
behaviour.
3
Plug in the second PowerLine adapter near the first adapter and wait for
the PowerLine LED on both units to light up.
/
1