Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Please perform the following checks in case of any failure occurring during operation. If the failure cannot be elimi-
it. Never attempt to disassemble the product.
Symptom
Power-on failure
Low massage intensity
If the problem still cannot be solved after troubleshooting, please contact us
at service_global@breo.com
STORAGE
When the device has not been used for over 3 months, take out and recharge it before use. Do not place it next to a wall or on
the ground or rooftop.
Make sure the room is well-ventilated. Keep the massager away from direct sunlight and any corrosive gas.
TRAVEL
The shockproof packaging can be used for shipping by air, rail, road, and sea. The device should be
protected from rainy and snowy weathers. Avoid placing it upside down and crashing it.
POWER CHECK
Check the voltage rating before switching on the device to ensure the required voltage match the available power source.
MAINTENANCE
Do not disassemble the product yourself.
Possible cause
Check whether the battery level is too low
Check whether the batter level is low
Please check whether the volumn of your
device gets to low
Basic solution
If yes, please charge the battery timely
If yes, please charge the battery timely
Please raise the volumn if so.
17
Publicidad
