Problem Solving - Eureka V19P11A510 Manual Del Propietário

 PROBLEM SOLVING
CAUTION
Make sure vacuum cleaner is off and charging plug is unplugged.
NOTICE: THERMAL CUT-OFF
This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor
overheating. If the vacuum suddenly shuts off, proceed as follows:
1) Check the vacuum for a possible source of overheating such as a full dust cup. blocked wand or
clogged filters. If these conditions are found, fix them and wait at least 30 minutes before
attempting to use the vacuum.
2) After the 30 minute period, press the power button.
Motor will not start
Not enough suction power
Brushroll will not turn
We O er 2-Year Limited Warranty.
Email Our Customer Service:
global_service@eureka.com
Problem Solution
Push cord securely into electrical outlet, try

another outlet or check circuit breaker.
See detailed "thermal cut-off' instructions

above.
Empty dust cup and clean or change filters.

See page 12 for maintenance instructions.
Remove clogs that restrict the airflow.

Check brushroll for debris. See page 14 for

maintenance instructions.
15