Technical Data; Inserting The Battery; Removing The Battery - Hilti C 4/12-50 Manual De Instrucciones Original

4

Technical data

4.1 Technical data
Weight
Output voltage
Output power
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1 Switching the charger on
▶ Plug the supply cord into the power outlet.
▶ LED 1 on the charger shows green.
5.2 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery. → page 7

5.3 Inserting the battery

WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.

5.4 Removing the battery

1. Press the battery release button.
2. Remove the battery from the product.
8 English
C 4/12-50
0.35 kg
10.8 V
50 W
2373347
*2373347*