Fasten the tarpaulin to the frame by forming loops from the fastening
rubbers (13).
Attach the side parts to the frame with the fastening rubbers.
Raising the Side Roof
There are three eyelets on the underside of the long side tarpaulin without
a door (17). Assemble the three support tubes (6 and 7) for the canopy and
insert the upper pin through one of the eyelets. Now run the tension cord for
the canopy over those eyelets and tie it to the ground with the pegs to use and
stabilise the long wall as a roof.
6
7
EN
15