NATURE & DECOUVERTES 15223710 Manual página 9

1. Place the product on a flat and even surface.
2. Connect the adapter cable to the corresponding port on the Foot Massager.
3. Plug the adapter into an outlet.
4. Turn the device on using the operating control panel:
Power Button
1 Press: turn on the massager in auto mode, the indicator light on the button turns yellow.
st
2 Press: change to clockwise rotation; the indicator turns green.
nd
3 Press: change to counter clockwise rotation; the indicator turns red.
rd
4 Press: turn o the massager.
th
Speed button
1 Press: Low speed; the indicator turns green.
st
2 Press: Medium speed; indicator turns yellow.
nd
3 Press: High Speed; indicator turns red.
rd
Heat Button
1 Press: High level, indicator turns highlight red.
st
2 Press: Low level, indicator turns lowlight red.
nd
Automatic switch-off time:
The Reflexology Foot Massager is equipped with an automatic switch-o function. The entire device will automatically turn o approx.
15 minutes after the initial use.
Do not operate for more than 15 minutes continuously. It is recommended to turn o the massager and allow it to cool for 30 minutes
before re-using. This will extend the product life.
OPERATION
NOTE
8