Changing The Input Source - Samsung 4+ Serie Manual Del Usuario

Display Modes (HDMI/DVI Input)
Optimal resolution is 1024 x 768@60Hz. See specification page for full available resolution.
SERVICE
SERVICE
Connector for service only.
✎
✎
NOTE
• For HDMI/DVI cable connection, you must use the
• The interlace mode is not supported.
• The set might operate abnormally if a non-standard video format is selected.
• Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
• PC(D-Sub) input is not supported.
• Connecting through the HDMI cable may not be supported depending on the PC.
• The headphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
To watch paid channels, the "CI or CI+ CARD" must be inserted.
• If you do not insert the "CI or CI+ CARD", some channels will display
the message "Scrambled Signal".
• The pairing information containing a telephone number, the "CI or CI+
CARD" ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your
service provider.
• When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the channel
list is updated.
Source
TV / Ext. / HDMI1/DVI / HDMI2 / AV / Component
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
✎
In the displaying Source list, connected inputs will be highlighted.
✎
PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI1/DVI input.
✎
Ext. always stays activated.
✎
Press the TOOLS button.
• Edit Name
You can set an external input sources name you want.
– When connecting a PC to the
– When connecting a PC to the
Edit Name.
– When connecting an AV devices to the
mode under Edit Name.
• Information
You can see detailed information about the connected external device.
All manuals and user guides at all-guides.com
HDMI IN 1(DVI)
Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)

Changing the Input Source

port with HDMI cable, you should set the TV to PC mode under Edit Name.
HDMI IN 1(DVI)
HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under
HDMI IN 1(DVI)
English - 8
port.
The image may differ depending on the
y
model.
port with HDMI to DVI cable, you should set the TV to DVI Devices
TV Side Panel