Publicidad
Idiomas disponibles
Idiomas disponibles
OBJ_DOKU-5417-001.fm Page 10 Wednesday, January 24, 2007 1:21 PM
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Machine-specific
Safety Warnings
Do not use the power tool for explosive mate-
rials (e. g., easily inflammable solvents).
Power tools produce sparks which could ignite
developing vapours.
In case the power tool should fall into the
material to be stirred, pull the plug immedi-
ately and have the power tool checked by an
after-sales service agent. Material that has pen-
etrated the power tool can cause damage and lead
to an electric shock.
Always use the auxiliary handle supplied with
the machine. Loss of control can cause personal
injury.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance. The power tool is guided more
secure with both hands.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Take protective measures when dust can
develop during working that is harmful to
one's health, combustible or explosive. Exam-
ple: Some dusts are regarded as carcinogenic.
Wear a dust mask and work with dust/chip extrac-
tion when connectable.
Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool.
Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
working. Damaged cables increase the risk of an
electric shock.
10 | English
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
Intended Use
The machine is intended for mixing pulverised building
materials such as mortar, plaster, adhesives, as well as
solvent-free paint, varnish and similar substances.
Technical Data
Stirrer/Mixer
Article number
Rated power input
Output power
No-load speed
Rated speed
Rated torque
Drive spindle dia.
Spindle collar dia.
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may vary.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Stirrer paddle
2 Stirrer paddle adapter
3 Drive spindle
4 Splash guard
5 Lock-on button for On/Off switch
6 On/Off switch
7 Auxiliary handle
8 Clamping lever for auxiliary handle
9 Clamping nut for splash guard
*The accessories illustrated or described are not
included as standard delivery.
GRW 9
PROFESSIONAL
0 601 968 0..
W
900
W
475
rpm
500
rpm
400
Nm
60
5
"
/
8
mm
43
kg
3.0
/II
3 609 929 B20 • 24.1.07
Publicidad
