(contact with or inhala
operator or bystander
Certain kinds of dust are
with
ves for wood c
connectable
Follow the dust-related na
Wear prot
ve gloves, safety glasses, close-
Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than
by hand)
When sanding metal, sparks are generat
material from work area
DURING USE
ways keep the cord away from moving parts of the t
touch the moving sanding disc
case of electrical or mechanic
If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect
the plug
AFTER USE
When you put away the tool, switch o the motor and ensure that all moving parts have come to a
complete stands
Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of
the plug
If for any reason the old plug is cut o the cord of this tool, it must be disposed of safely and not le
una ended
SYMBOLS
Read the manual
Warning
OPERATING INSTRUCTION
(Fig.3)
Speed Controller
With the speed controller (3) you can adjust the speed according to applica
speed se
ke sure the sander does not become overloaded and stops running.
Turn the speed controller (3) steplessly to the desired se
controller can be adjusted from 1-6. The speed rate can be changed during opera
Hint: The required speed rate for cu
going to process. For best performance, make some pr
Always use abrasive papers suited to the material you want to sand. Then papers must have correct grain
size.
Depending on grain size there are degrees of coarseness. The coar
back of paper
of the dust may cause allergic rea
wear a dust mask and work with a dust extr
as carcinogenic (such as oak and beech dust) especially in c
wear a dust mask and work with a dust extr
requirements for the materials you want to work with
do not use dustbox and keep other persons and combus
CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
resp,sanding a workpiece depends on the material that you are
s and or respiratory diseases to the
rot
rect the cord to the rear, away from the tool
ately switch o
Wear dusk mask
Do not dispose of old appliances in the
household garbage
Disconnect from power supply while
maintance
to increase or decrease the speed. The
cal tests.
rain.
GB
evice when connectable
device when
for long hair)
tool and disconnect the plug
ropriate
well.
by a number on the
4