Troubleshooting - HIGHONE DHP 7 A++ W701T Instrucciones De Uso

C
Useful information

Troubleshooting

The tumble dryer has systems that continually carry out checks during the drying process to
take the necessary measures and warn you in the event of a malfunction.
WARNING:
If the problem persists, even after carrying out the steps in this
section, contact your dealer or an authorised service provider.
Never attempt to repair a product that is out of order.
PROBLEM
The surface of the lint filter
may be clogged.
The heat exchanger may be
clogged.
The air inlet at the front of
the machine may be closed.
The drying process takes a
long time.
The humidity sensor may be
covered with limescale.
The tumble dryer may be
overloaded.
After spin-drying, the
laundry is not dry enough.
30
REASON SOLUTION
Wash the filter in warm
water.
Clean the heat exchanger
Open the doors/windows
to prevent the room
temperature from getting
too hot.
Clean the humidity sensor.
Do not overload the dryer.
Select a higher spin speed
on the washing machine.
EN
C
Useful information
PROBLEM
Laundry, that comes out warm at the end of the drying
process, is usually more damp.
The program used may not
be suitable for the type of
laundry.
The laundry comes out
damp at the end of the
The surface of the lint filter
drying process.
may be clogged.
The heat exchanger may be
clogged.
The tumble dryer may be
overloaded.
After spin-drying, the
laundry is not dry enough.
The dryer may not be
plugged in.
The door can be opened.
The dryer does not open
or the program does not
start. The dryer does not
You may not have set a
start when the settings have
program or pressed the
been adjusted.
Start/Pause button.
The child lock may be
enabled.
The door may not be
properly closed.
The program was stopped There may have been a
for no reason. power cut.
The water container may
be full.
The program used may not
The clothes have shrunk,
be suitable for the type of
bobbled or deteriorated.
laundry.
31
REASON SOLUTION
Check the care labels
on the clothes, choose a
program, that is compatible
with the type of laundry, and
use the time programs as
well.
Wash the filter in warm
water.
Clean the heat exchanger
Do not overload the dryer.
Select a higher spin speed
on the washing machine.
Make sure it is plugged into
the power outlet.
Make sure the door is
properly closed.
Make sure the program
has been set and the dryer
is not in Standby (Pause)
mode.
Disable the child lock
function.
Make sure the door is
properly closed.
Press the Start/Pause
button to start the program.
Empty the water tank.
Check the care labels on
the clothes and choose a
program that is compatible
with the type of laundry.
EN