General Operating Instructions - Cole-Parmer OS-200D-C-SYS Manual Del Usuario

General Operating Instructions

The stirrer must be securely mounted as specified in the installation instructions.
Ensure the mixing shaft and blade are securely attached. The stirrer is now ready
for use to mix liquids.
Button Operation Functions
Power Button - Turns the stirrer motor on and off. When initially
turned on, stirrer will spin at 50 rpm following a 5 second delay.
Increase Button - Increases the speed. If pressed within five seconds
of the stirrer being turned on it will stir at the last speed before turned
off.
Decrease Button - Decreases the speed. If pressed within five
seconds of the stirrer being turned on it will stir at 50 rpm.
OL Indicates an overload condition. The load is too great for the stirrer and must
be reduced. To reset stirrer turn power back on.
Safety is built into this stirrer. When it is turned on (Auto Start not enabled) it pauses
for 5 seconds before it starts to mix. The last speed used is displayed. The user
has three options.
1. Do nothing. The stirrer will start to stir at 50 rpm after five seconds.
2. Press the increase button and the stirrer will start to stir at the last speed set
before powered off. This speed is displayed.
3. Press the decrease button and the stirrer will start to stir at 50 rpm.
8