Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLATION METHOD
3.Wiring figure
Connect the female joint of the wires group from the mainboard
with the male joint of the connective wires group. (See Fig.3-3)
Connect the other side of the connective wires group with the male
joint of the wires group leads from the wire controller.(See Fig.3-3)
Install the Adapter Board and the Display Board on the High Wall
(See the Appendix for instructions).
4-core shielding wire
The connection cable
(6m, if need more you can
buy other 6m wire CL97448)
44
Main board
CN40
Fig 3-3
Publicidad
