Publicidad
THERMO FORMA WATER JACKETED INCUBATOR WARRANTY USA*
The Warranty Period starts two weeks from the dale your equipment is shipped from our facility. This allows shipping time so
the warranty will go into effect at approximately the same time your equipment is delivered. The warranty protection extends to
any subsequent owner during the first year warranty period.
During the first year, component parts proven to be non-conforming in materials or workmanship will be repaired or replaced at
Thermo Forma's expense, including labor. In addition, after the initial warranty period of one year, the CO 2 sensor (IR) will be
warranted for a second year, parts only. The CO 2 sensor (T/C) will be warranted for four additional years for a total of five
years, parts only. The water jacket chamber has a unit production lifetime warranty, parts only, against rust-through and leaks.
Unit production life is defined as the period of time the current chamber design is in production, plus seven years. If corrosive
chemicals are identified in the chamber, the warranty will be voided. Installation and calibration is not covered by this warranty
agreement. The Thermo Forma Service Department must be contacted for warranty determination and direction prior to per-
formance of any repairs. Expendable items, glass, filters and gaskets are excluded from this warranty.
Replacement or repair of components parts or equipment under this warranty shall not extend the warranty to either the equip-
ment or to the component part beyond the original warranty period. The Thermo Forma Service Department must give prior
approval for return of any components or equipment. At Thermo Forma's option, all non-conforming parts must be returned to
Thermo Forma postage paid and replacement parts are shipped FOB destination.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL OR
IMPLIED. NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY.
Thermo Forma shall not be liable for any indirect or consequential damages including, without limitation, damages relating to
lost profits or loss of products.
Your local Thermo Forma Sales Office is ready to help with comprehensive site preparation information before your equipment
arrives. Printed instruction manuals carefully detail equipment installation, operation and preventive maintenance.
If equipment service is required, please call your Thermo Forma Service Office at l-888-213-1790 (USA and Canada) or 1-740-
373-4763. We're ready to answer your questions on equipment warranty, operation, maintenance, service and special applica-
tions. Outside the USA, contact your local distributor for warranty
information.
ISO
9001
* Models covered under this warranty: 3110 3120 3130 3140 3111 3121 3131 3141
REGISTERED
3210 3220 3230 3240 3211 3221 3231 3241
Rev. 3
3/01
Publicidad
