EN
Menu Map
Refer to the COLORband H9 ILS product page on
Mode
6-Ch
9-Ch
DMX Mode
11Ch
18Ch
23Ch
ILS Mode
iLS
Static Color
C--
Programs
P--
Speed
S--
Sound Mode
Snd
Sensitivity
SenS
Manual
U--
Mode
Dimmer
dIM
Speed
RF Control
SEt
DMX Linking
The COLORband H9 ILS can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 490.
Master/Slave Connection
The COLORband H9 ILS uses the DMX data connection for its Master/Slave mode. Information about configuring the
COLORband H9 ILS for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
ILS Connection
The COLORband H9 ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated
Lighting System (ILS) ecosystem (patent pending). For more information about configuring the COLORband H9 ILS into
ILS mode, please refer to the User Manual available at www.chauvetdj.com.
RFC (Radio Frequency Control) and RFC-XL
The COLORband H9 ILS can be operated with the CHAUVET RFC and RFC-XL.
3
QUICK REFERENCE GUIDE
Programming Levels
d 1–507
d 1–504
d 1–502
d 1–495
d 1–490
iLS1–4
C 1–63
P 1–14
S. 1–100
Snd
u 0–100
r. 0–255
G. 0–255
b. 0–255
A. 0–255
W. 0–255
P. 0–255
oFF
dIM1–3
RF
GP1–4
REST
www.chauvetdj.com
for the latest menu map.
Description
6-channel DMX mode (see
9-channel DMX mode (see
11-channel DMX mode (see
18-channel DMX mode (see
23-channel DMX mode (see
Sets ILS mode
Static colors
Automatic programs
Automatic program speed
Sound-active program
Sound sensitivity
Combine red, green, blue, amber, white, and UV for a
custom static color
Sets the dimmer speed
oFF
Disables RFC remote control
Link to a single remote by pressing and holding <freeze>,
Link
(RFC) or <BLACK OUT> (RFC-XL) until the display shows
PASS (success) or ErrO (failure)
PubL
Public mode, control with any RFC or RFC-XL remote
Sets to an RFC-XL remote receiving group
Reset to factory default settings
Single Zone
Modes)
Single Zone
Modes)
Single Zone
Modes)
3-Zone
Modes)
3-Zone
Modes)
COLORband H9 ILS QRG Rev. 3