Publicidad
Idiomas disponibles
Idiomas disponibles
Step-by-step installation of the swinging tire (1-point suspension):
1. Attach the load-relieving strap.
2. Connect the load-relieving strap and rope using a carabiner and protective cover.
Pull the protective cover over the metal parts and close the hook and loop
fastener tightly (risk of pinching!).
3. Attach the swinging
4. Note: Place the rubber tire in the cover.
tire to the suspension
Please note: Insert the tire so that the valve
point (swivel).
Is in the opening provided for it (see photo).
(The second carabiner
Close the zipper only when the rubber tire is
is not included in the
one-quarter filled with air. The rubber tire can
scope of delivery.)
then be completely inflated until it firmly fills out
the cover. The tire can lose air when it is used
frequently. Regular inflation is therefore necessary!
10
Step-by-step installation of the swinging tire (4-point suspension):
1. Remove the load-relieving strap.
2. Thread one rope for each suspension loop. The length of the rope can be adjusted
using the height adjustment links. The ropes can be attached on one, two, or four
suspension points as needed.
Tip:
We recommend using an electric air pump to fill the tire completely with air.
Disposal
Dispose of the packaging appropriately. When you want
to dispose of this item, do so according to current regulations.
Local municipal services can provide you with information.
Save these use and maintenance instructions. If ownership
of the item is transferred, please also transfer these instructions.
Valve of the
rubber tire
Cover of the
swinging tire
11
Publicidad
