Before Use; Security Measures - Méanail Paris PONCEUSE Manual

MEANAIL PONCEUSE
The Electric Nail File Drill Meanail Paris saves you a lot of time
when you apply and remove nail polish. The file is fast,
thorough and more efficient than a traditional nail file!
USE
The device is easy to use for beginners and experienced - enjoy beautiful hands
and feet in no time ! Lightness, power and good grip. Also, the speed of the drill is
variable and allows to dose just as it should according to the desired use (extension,
care, removing nail polish etc...)
CHARACTERISTICS
• Portable drill equipped with a mechanism for fast loading of heads with locking,
high speed of rotation, low variation and a low voltage safety.
• Power Box stable energy, overload protection, efficient converter, non-polarized
speed adjustment.
• 6 different heads + 24 Grit File Sand Pieces.

BEFORE USE

• Before connecting the unit to the power supply, make sure that the input voltage
is the same voltage required on the back of the power supply box.
• Make sure that the device is plugged into an electrical outlet.
• Then connect the portable drill to the electrical outlet of the power supply box.
USE
1. Select the « ON » switch to turn on the device, the power indicator will illuminate.
Make sure the speed is at a minimum when starting the drill.
2. Insert the head of your choice into the nail drill. To change a head, turn the black
knob to the left to remove the head, insert the head and turn the knob to the
right to lock.
3. Choose the direction of the head with the « FWD/REV » switch, « FWD » forward
and « REV » backwards.
4. When you adjust the speed dial on the nail file, the file will start, the « ON »
indicator will light up and can intensify at the selected speed.
5. Make sure that the speed is kept to a minimum when stopping the nail drill and
that the switch is turned « OFF » after using the machine.

SECURITY MEASURES

• Keep the device dry, otherwise it may damage the device or cause irreversible
damage.
• The nail dry can be restarted if it stops due to overload.
• If the indicator light is not illuminated during operation, please check the fuse and
replace it if it is broken.
• Make sure the power is off if the nail drill is not used for a long time.
• This device is not intended for use by persons (including children) with limited
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless supervised of instructed by a responsible person. For their safety, children
must be supervised to make sure they do not play with the device.
• Make sure the device or cable is not faulty to avoid injury. If the power cord is
damaged, it must be replaced to avoid danger. If this is the case, please contact
customer support at support@plastimea.com