Uline H-9093 Instrucciones De Montaje página 2

NOTE: Do not fully tighten bolts until cart is
completely assembled.
1. Attach casters to base using 16 short hex head bolts,
lock washers and washers. (See Figure 1)
NOTE: Ensure same set of casters go on each
end of base.
Figure 1
2. Turn base over onto its casters and attach end
panels to base using four Phillips head bolts and
locknuts per end panel. (See Figure 2)
Figure 2
PAGE 2 OF 9
ASSEMBLY
3. Attach three shelf rods per level to end panels using
18 long hex head bolts. (See Figure 3)
Figure 3
4. Attach top to end panels using four Phillips head
bolts and locknuts. (See Figure 4)
Figure 4
1220 IH-9093