Switching The Appliance On/Off - Beem i-Turbo Manual De Instrucciones

i-Turbo Akkusauger 2 in 1
Attaching accessories
(images A1, A2)
To fix the charging station, proceed as fol-
lows:
Put the appliance holder (14a) onto
‹
the pedestal (14b) (image A1).
Screw both parts from below with the
‹
screws supplied (image A2).
Insert the charging cable into the con-
‹
nection socket (15) on the side of the
charging station.
NOTE
► To avoid damaging the plastic parts,
do not screw in too tightly.
Attaching the floor brush
(image B1)
To attach the floor brush (8) to the upright
vacuum cleaner, proceed as follows:
Align the suction inlet of the base ap-
‹
pliance with the floor brush.
Push both parts together until they
‹
audibly snap in.
26
Attaching the handle to the
upright vacuum cleaner
(image C1, C2)
To attach the handles to the upright vacu-
um cleaner, proceed as follows:
Insert the handle (2) into the socket of
‹
the housing (image C1).
Turn the screw supplied into the han-
‹
dle (image C2).

Switching the appliance ON/OFF

The appliance can be used either as a
handheld or an upright vacuum cleaner.
To switch on the appliance, press the
‹
ON/OFF button on the upright vacuum
cleaner (1) or on the handheld vacu-
um cleaner (3).
To switch off the appliance, press the
‹
corresponding button again.
BEEM - Elements of Lifestyle
EN