Safety Instructions - Buffalo CH919 Manual De Instrucciones

EN

Safety Instructions

The machine is intended for commercial and indoor use
by trained and skilled personnel familiar with these
instructions.
Never bypass the safety interlocks on the appliance.
Blades are sharp - handle with care !
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT use jet/pressure washers to clean the appliance.
• DO NOT immerse the appliance in water.
• This appliance is only used for crushing ice. Do not use the
appliance for anything other than its intended use.
• Switch off and disconnect from power supply when not in use,
before assembling or disassembling, and before cleaning.
• Avoid contacting moving parts. Never place fingers or other
utensils into feeding or discharge areas.
• Ensure to check ice chute for the presence of foreign objects
before use. Use original attachments only to prevent any
damage.
• This appliance is not intended for use by persons with reduced
physical, sensory or mental capabilities, or lack of experience
and knowledge.
2
CH919_ML_A5_v1_20220622.indb 2 CH919_ML_A5_v1_20220622.indb 2 2022/6/22 15:53 2022/6/22 15:53