Publicidad
Idiomas disponibles
Idiomas disponibles
bar
bars
lb.
pound
mm
millimetre
''
inch
kg
kilograms
l/min liter per minute
psi
pounds per square inch
The compressed air eccentric sanders are suitable
for sanding wood, plastic, metal, stone, compos-
ites, acrylic-based mineral materials, paint/clear
coats, fillers and similar materials.
Materials containing asbestos must not be pro-
Compressed air eccentric
sander
Sanding pad diameter
Drive
Operating pressure (flow
pressure)
Speed
Accessories shown or described are sometimes not
included in the scope of delivery.
[3-1]
On/Off switch
[3-2]
Speed control
[4-1]
Sanding pad
CAUTION
Risk of injury
Make sure that the pneumatic tool is switched off
when you connect the compressed-air supply.
All manuals and user guides at all-guides.com
Intended use
Technical data
LEX 2 185/7
7-9/32" (185 mm)
Compressed-air
vane motor
87 psi (6 bar)
6500 - 8000 rpm
Functional description
Compressed-air supply and commissioning
cessed.
Only use with Festool hose system IAS 2 or IAS 3
and Festool sanding pads!
The user is liable for improper or non-in-
tended use.
Compressed air eccentric
sander
Working strokes
Sanding stroke
Air consumption at nominal
load
Weight
Compressed-air processing
The Festool service unit should always be used to
ensure that Festool pneumatic tools function cor-
rectly. Consisting of a filter, control unit, condensa-
tion drain and lubricator, the service unit cleans and
LEX 2 185/7
13000 - 16000 rpm
9/32" (7 mm)
390 l/min
3.5 lbs (1.6 kg)
7
Publicidad
