Descargar Imprimir esta página

Important Safety Information; Product Specifications - Craftsman CMXMSAJ94772 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

50" W x 22" D x 36" H Stackable Storage Rack
CMXMSAJ94772

IMPORTANT SAFETY INFORMATION


WARNING:
instructions, illustrations and specifications
provided with this storage rack. Failure to follow
all instructions listed below may result in personal
injury and/or property damage.
Work Area Safety
a ) Keep work area clean and dry.
b ) Use correct/recommended tools for the job.
c ) Never leave unattended tools plugged in
or running.
d ) Never force a part into place.
e ) Keep small parts away from children. Never
leave a small child unattended while assembling.
Personal Safety Warnings

Failure to heed these warnings may result in personal
injury and/or property damage.
a ) Wear appropriate safety apparel for the job you
are doing.
b ) Wear safety glasses/goggles.
c ) Never crawl, sit, stand, or climb on the rack
d ) Always use common sense – your personal safety
is your responsibility.
Wall Anchor Safety Warnings

WARNING: Serious injury or death can occur
from the rack tipping over. To prevent this, the
rack must be secured to a wall, especially in
earthquake -prone areas, or where surfaces are
uneven, and where children and/or pets are present.

Different wall materials require different types
of fasteners. Use fasteners suitable for your
specific type of wall. If you are uncertain about
what type of fastener to use, then please contact
your local hardware store.
Weight Limit Safety Warnings

WARNING: Never exceed the following
weight limits:
a ) Maximum load for each shelf: Up to 1,500 lbs
(680 kg) when weight is evenly distributed.
b ) It is recommended that the heaviest load be placed
on the bottom shelf.
SAVE ALL WARNINGS
AND INSTRUCTIONS FOR
FUTURE REFERENCE
Read all safety warnings,

PRODUCT SPECIFICATIONS

RACK DiMEnsiOns
Width
Depth
Height
shElF CAPACiTiEs
Capacity Per Shelf
Capacity Per Shelf
in Triple Stacked
(108" high) Configuration
Total Rack Capacity
RACK WEighT
READ ALL INSTRUCTIONS
INDIVIDUAL RACK ASSEMBLY

WARNING: Serious or fatal crushing injuries can
occur from rack tipping over. To prevent this, the
assembled rack must always be secured to a wall,
especially in earthquake-prone environments, where
surfaces are uneven, and where children and/or pets
are present.
NOTICE: Tools required for rack assembly: 4 mm hex
14
key
(included) OR 4 mm hex bit
13
10 mm wrench
included), flat-head screwdriver (not included)

BEFORE YOU BEGIN:
Read all instructions thoroughly.
Remove all components from the box, and lay
them on the floor in an orderly fashion.
Wear eye protection.
Be cautious of sharp edges.
Keep this information for further reference.
If you are not stacking a second rack at this time,
then please store the stacking brackets
(8) locking pins
they will be needed.
Expandable Upright Frame Instructions
(Fig. C, D)
1. Place one (1) vertical beam
2
vertical beam
on the floor, parallel to one another
[about 22" (55,9 cm) apart]. The widest part of the
English
49.6" (126.0 cm)
22" (55.9 cm)
36" (91.4 cm)
1,500 lbs (680.4 kg)
*when weight is
evenly distributed
1,000 lbs (453.6 kg)
*when weight is
evenly distributed
3,000 lbs (1,260.8 kg)
*when weight is
evenly distributed
48.5 lbs (22.0 kg)
15
(included),
(included); rubber mallet (not
17
10
for potential future use as
1
and one (1) pre-bolted
and
3

Publicidad

loading