Notice
This Product Manual is subject to change without written notice.
Read the instructions carefully and use the unit properly before operating. Failure to do so may
cause damage and/or personal injury, which will void the product warranty.
Features
4
NO.
Name
• Press it twice to select the mode.
• Press it once to start the charging after the selection.
1
Mode Button
• Hold it for 6 seconds to start the forced charging, if the
selected battery's voltage is < 1V.
• Press it once to end the process while charging.
2
Solid Red LED indicates a potential error has happened.
Solid Blue LED indicates the charger is in Standby Mode:
3
not charging or providing any power to the battery.
4
Indicates the connected battery's SOC (State of Charge).
5
Indicates the Charge Mode.
Descriptions
5