Technical Specifications - NORAUTO NO4112 Manual

Rotating the handle
Press the Lock button (8) while turning the handle
to your preferred orientation.
MAINTENANCE
WARNING!
Unplug the charger before cleaning it .
Regularly clean the charger using a soft brush or dry cloth.
Regularly clean your tool using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Maintenance
Your tool has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Your charger does not require any maintenance apart from regular cleaning.
Storage
Store your charger in a cool, dry place. As a general practice, it is best to unplug battery chargers
and remove battery packs when not in use. No battery pack damage will occur, however, if the
charger and battery pack are left plugged in.

TECHNICAL SPECIFICATIONS

Product name
Working voltage
Pad diameter
Weight
Noise emission
Note:
• that the declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another.
• that the declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
• that the vibration emission during actual use of the power tool can differ from the declared total
value depending on the ways in which the tool is used.
• need to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trigger
time).
CORDLESS POLISHER
10.8 V DC
3" (75 mm)
0.76 kg
LpA: 71 dB(A)
LwA: 82 dB(A)
KwA: 3 dB(A)
Adjusting speed
Adjust the speed of the machine by holding
down the Variable Speed Switch (4).
Item no. 2380591-NO4112
Battery Li-ion, 2000 mAh
Orbit per minute 0-3000 RPM
Vibration emission ah, P ≤ 1.48 m/s2
EN
59