Installing The Wall Mount - VALBERG CYCLONIC-S10 Instrucciones De Uso

B
Product usage

Installing the wall mount

NOTE: Find a suitable location for the wall mount.
• Preferably install the wall mount near an mains socket.
• Only install the wall mount in a location where the ambient temperature is
constant and between +5 °C and 40 °C.
• Place it in a clean, dry place, away from heaters and direct sunlight.
• Make sure that the wall on which the wall mount will be secured is able to
support the weight of the unit.
Position the wall mount plate on the wall. Make sure that the base of the wall mount
is approximately 110 cm above the ground so that the brush of the assembled stick
vacuum gently rests on the floor. Mark the drill holes for the screws with a pencil.
Then use a 6.3 mm drill bit to drill the screw holes, and insert the appropriate wall
plugs. Position the wall mount plate on the wall. Screw the mount to the wall.
NOTE:
• Slide the charging cable through the clip on the wall mount.
• The vacuum cleaner can be charged whilst suspended on the wall mount.
DANGER! RISK OF ELECTRIC SHOCK!
• Do not pierce the electric cables (or water pipes) located in the wall.
• Do not install the wall mount on a metal wall.
17 EN