Oster TSSTTVDG01 Manual De Instrucciones página 17

Horno digital para mostrador
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

When the Warming cycle is complete, the
unit will emit 3 beeps. The LCD and the
Start/Cancel Button Light will turn off after
30 seconds.
NOTE: You can cancel the warming cycle at any
time by pressing the Start/Cancel Button
once.
Using the Defrost Function (See Fig. 10)
Step 1. Turn the Function Knob to the Defrost
function.
Default Temperature: 450ºF.
Default Time: 16 minutes.
You may manually activate the Turbo
Convection Heat by pressing the Turbo
button once to turn it on. The blue light of
the Turbo button will turn on.
Step 2. To set the temperature:
Turn the Temperature/Time Knob if
you wish to increase or decrease the
temperature setting. The frame around the
temperature setting on the LCD display will
be blinking. For the Defrost function, the
temperature can be set from 150 to 450ºF
in 5-degree increments. Once you have
selected the desired temperature, press the
knob once to set that selection. The frame
of the temperature will disappear and the
frame of the time setting will start blinking.
Step 3. To set the time:
Turn the Temperature/Time Knob if you
wish to increase or decrease the defrosting
time. The maximum time setting for
Defrost is 60 minutes (1 hour). Once
you have selected the desired defrosting
time, press the Start button to initiate the
cooking process. The frame of the time will
disappear.
English-17
Figure 10

Publicidad

Tabla de contenido
loading

Tabla de contenido