FULLY CHARGE THE BATTERY
1
•
Charge the battery fully (up to 3 hours) before
using the MGUN300 for the first time.
•
Connect the charging cable to the charging port
at the bottom of the battery / handle.
•
Plug the charging cable into a suitable socket.
ASSEMBLE THE DEVICE
2
•
After the battery is fully charged, remove the charging
cable.
•
Insert the battery / handle firmly into the power area of
the MGUN300. You notice a click.
•
Pay attention to the correct insertion position, which
you can recognize by the contacts and the shape of
the connector.
•
To remove the battery, press the button (red) on the
main body. Losing weight may feel stiff. This is NOT a
defect, but serves the optimal connection between the
battery and the main body.
ATTACH THE MASSAGE DEVICE
3
•
Make sure the device is fully charged and turned off.
•
Select the desired massage attachment.
•
Push the attachment - without force - into the device and turn it to secure it.
•
EXCEPTION: When choosing the U massage head, make sure that the slightly raised notch on the attach-
ment is aligned with the groove on the device opening and do not turn the massage head!
•
Attachments and speeds are explained below.
QUICK START GUIDE
25 25
EN