WARNING
While operating, the device can reach high temperatures. To avoid burns and accidents, do not use the
device if it is malfunctioning, and do not use non-original spare parts.
ELECTRICAL HAZARD
Danger due to electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The device must be unpacked
and fully checked before connection by a professional.
5.2 Use
WARNING
The setting up of the device installation and maintenance should only be carried out by professionals.
• Do not leave the appliance running without watching it.
• During use, your hands must be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The device must be completely removed from its packaging. All guards must be completely removed.
Place the unit upright on a sturdy, flat surface. Never put the toaster on a flammable surface.
Do not install this device near open fires or other heating devices.
The device must be plugged directly into a wall outlet.
Using a power strip will trip the device.
USE
Place your toast or toast on the mat
Press the ON/OFF switch, then turn the thermostat to the desired grill function (upper rotary knob from 60 to
200°C)
Select upper and lower or only lower heating resistances.
Select conveyor belt speed. (Down rotary knob)
At the end of use, turn the grill thermostat to OFF, then press the ON/OFF switch.
REMARK
The appliance is equipped with a safety system in case of overheating. In the event of tripping, unplug the
appliance and allow it to cool. If this protection system activates regularly, it is essential to contact your
retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the back
of the device. To do this, wait for the temperature to drop, press the Reset button.
EN