Cleaningand Maintenance; Safety Instructions; Daily Maintenance - Casselin CSAC Manual De Instrucciones

In 10 minutes, the temperature of 250°C is reached. Once the desired temperature is reached, the red light
goes out. Oil the plate with the wiping pad and sunflower oil.
Pour the batter in the middle of the cooking surface and use the CASSELIN crepe rake to evenly distribute
the batter over the cooking surface. To achieve the desired browning on the bottom side, use the CASSELIN
spatula to flip the pancake and cook the other side. Use the CASSELIN pancake spatula to remove the
pancake once cooking is complete.
When the temperature decreases, the device starts heating again and the red light turns on again.
At the end of service, turn the thermostat to 0 and unplug the appliance.
REMARK
The appliance is equipped with a safety system in case of overheating. In the event of tripping, unplug the
appliance and allow it to cool. If this protection system activates regularly, it is essential to contact your
retailer.
After automatic shutdown, the device can only be put into operation by pressing the Reset button on the back
of the device. To do this, wait for the temperature to drop, press the Reset button.
6. CLEANING AND MAINTENANCE

6.1 Safety instructions

Any maintenance, cleaning, repair of the appliance must be done with the appliance unplugged (isolated from
all electrical sources).
The use of caustic detergents and baking soda for cleaning is prohibited. Water must not get inside the
device.
Never immerse the appliance in water or any other liquid.
Use the Casselin brand products provided for this purpose.
WARNING
The device cannot be cleaned with a direct water jet (no pressurized water jet).

6.2 Daily maintenance

Unplug the device
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried.
Store the device in a dry place.
6.3 Safety instructions for the maintenance of the device
Daily check that the power cord is not damaged. Never use the appliance when the cord is damaged. If the
cord has any faults, it must be replaced by a qualified technician.
In the event of a fault, contact your dealer.
Any maintenance or repair work should only be carried out by a professional.
REMARK
In the event of a trip, unplug the appliance, let it cool down and contact your retailer. If the unit does not start,
check your power cord. The device must not be plugged into a power strip but directly into a wall socket. For
any other anomaly, contact your dealer.
REMARK
Waste from used devices: all used devices must, when disposed of, comply with the regulations in force in
their country*. It is imperative to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling
FN