Environmental Protection - Vesta DH600-A Manual De Instrucciones

Use lamp type (or alternative type) DSR-1.5-S-68
(Code ILCOS D in accordance with IEC 61231).
Fluorescent reflector lamp - Integral induction type ballast
- Maximum power: 1.5W
- Voltage range: 12V
- Dimensions: diameter 68mm
We decline liability for any damage or accident from any use of this product
which is not in conformity with the instructions contained in this booklet.
All eFulfillment GmbH products meet the Conformité Européenne (CE) standard.
The CE symbol indicates that a product complies with the applicable rules within the European Union.
A Declaration of Conformity can be found here: www.efulfillment-online.com
ENVIRONMENTAL PROTECTION:
This product is marked with the symbol on the selective sorting of waste of electronic
equipment. This means that this product must not be disposed of with household
waste but must be supported by a system of selective collection in accordance with
Directive 2012/19/EU. It will then be recycled or dismantled to minimize impacts on
the environment. Electrical and electronic products are potentially dangerous for the
environment and human health due to the presence of hazardous substances.
For more information, please contact your local or regional authorities.
Note:
a. In order to reduce the environmental impact (e.g. energy use) of the cooking
process, please be sure that your product is installed according to the user
manual. Keep the operation place ventilated. Keep the extraction duct direct and
as short as possible.
b. For the product with manual operation mode; we suggest to switch the motor off
within 10 minutes after finishing the cooking process.
c. Please be sure to dismantle related components according to the user manual
when disassembling for maintenance. Protect the parts to make the re-installation
easier and to avoid damage.
LAMP
[ EN ● 14 ]
Version: 1.0
KEN001DH 26.09.2017