Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

7. MAINTENANCE:
NOTICE
Do not tilt the generator when adding engine oil. This could result in overfilling
and damage to the engine. Don't make foreign body fall into engine.
Oil and gasoline could pollute the environment, don't throw it in the trash or pour
it on the ground.
5. Place an oil pan under the engine.
Remove the oil drain bolt
oil from the oil tank.
6. Check oil filler cap
drain bolt
O il fi l ler ca p pa c king
Replace immediately with new one if
damaged.
7. Assemble oil drain bolt and oil filler
cap packing.
8. Add oil till to a suitable level tighten
oil filler cap.
9. Assembly the end cap at the bottom
of machine.
10. Assembly the sight glass of engine
oil.

Air filter:

1. Unscrew but unloosen the screw 1
and take off the left exterior cover 2.
2. Remove the air filter cover and
foam element 3.
3. Wash the foam element in solvent
and dry it.
4. Add oil for the foam element and
squeeze out excess oil. The foam
element should be wet but not
dripping, avoid be damage.
5. Insert the foam element into the
air filter case.
. Drain t he
O- ring
Oi l
67

Publicidad

Solución de problemas

loading

Productos relacionados para Active AGi3500