Publicidad
Idiomas disponibles
Idiomas disponibles
User Interface
The user interface (15) is used to select the
working mode and to indicate the status of the
power tool (Fig. 12).
Status Indications
Power tool status (17)
Green
Yellow
Red
Red
Flashing red
– In combination with the kick-
back control indicator (19)
Flashing blue
1605A000XG GBH18V-24C 202208.indd 17
Operating Instructions
page heading
Fig. 12
Meaning/cause
Status OK
Critical temperature has been
reached or rechargeable battery
is almost empty
Power tool has overheated or
rechargeable battery is empty
Impact/mode selector switch
activated during operation
Motor is jammed, battery too weak
General error
Kickback control is triggered
Power tool is connected to a mobile
device via Bluetooth®
or
settings are being transferred
-17-
(15)
(17)
(23)
(22)
(21)
(20)
Solution
–
Allow the power tool to cool down, or
replace or charge the battery
Allow the power tool to cool down, or
replace or charge the battery
Turn the power tool off and on again
Charge the battery or use the recom-
mended battery type
– Turn the power tool off and on again,
or remove the battery and reinsert it
If the error persists:
– Send the power tool to the after-
sales service
Turn the power tool off and on again
–
(18)
(19)
9/15/22 10:41 AM
Publicidad
