Technical Assistance - S&P COMET-N Manual De Instrucciones

INSTRUCTIONS FOR USE (FIGURE 4)
• The COMET wall-mounted dryer is automatically activated and will therefore start to operate
as soon as you remove the drying tube from its holder. As a safety measure, the dryer is also
equipped with an automatic shut-off device that will activate after 15 minutes of continuous
operation. To reset the device, simply return the drying tube to the holder.
• Users can adjust the drying temperature by turning the temperature selector:
• Using the shaver socket: To access the shaver socket, simply lift the cover (E). Ensure
the power requirements of the shaver are less than 20W. Close the cover (E) after use.
MAINTENANCE
• Before carrying out any maintenance task, ensure that the appliance is fully disconnected
from the power supply.
• Clean the surface of the appliance using a damp cloth, ensuring that the air intake grille
(bottom of the unit) is completely free of dust.
• Do not use detergents or abrasive products.
DECOMMISSIONING / RECYCLING
EEC directives, and the commitment we have to future generations, bestow a
responsibility to recycle materials; all waste from packaging should be placed in
the corresponding recycle bins, and all appliances replaced should be taken to the
nearest Waste Services Centre.

TECHNICAL ASSISTANCE

The extensive Network of Approved S&P Dealers guarantees the appropriate technical
assistance.
If some anomaly in the operation of the appliance is detected, please contact any of the
aforementioned dealers, who will assist you as necessary.
Any manipulation that is not strictly required for the installation of the appliance or performed
by non Approved S&P Dealers will render the guarantee null and void.
To clarify any query you may have concerning S&P products, contact the After Sales Service
Network if you are based in Spain, or your normal distributor if you are located elsewhere.
To locate your nearest dealer, please visit: www.solerpalau.com
Minimum temperature
Maximum temperature
8