Publicidad
Idiomas disponibles
Idiomas disponibles
USE OF THE HELMET
The use of an ASTM or SNELL certified helmet is recom-
mended, the helmet must be worn at all times when
riding your scooter.
The correct helmet should: Image 1
• Be comfortable
• Have good ventilation
• Fit correctly
• Covers the forehead
Incorrect helmet position: Image 2
• The helmet does not cover the forehead
imagen 1
ARMED:
1. Please connect the power cord carefully following the arrows
2. Assemble the tube to the scooter taking care not to crush the cable
3. Tighten the base screws.
4. Insert the bell into the blue handlebar grip and screw them into
the handlebar (the red handlebar rotates clockwise, clock and blue
on the contrary).
Before using your scooter remember:
Put it to charge (for safety the scooter does not turn on while it is
find loading).
Adjust the height of the handlebar by opening the post lock (6) and
pressing the height adjustment button.
PANEL:
On/O : Hold the button down for 2 seconds.
Tail light on/o : Press the button once.
Speed change:
Press the button 2 times (Speed 1: 10 Km/h Speed 2:18km/h).
Change to miles or km: Press the button 3 times.
USE:
• To advance, gain momentum and then press the accelerator of your
scooter.
• To stop you can use the electric brake located on the handle
left (red color) or manually by stepping on the dashboard rear.
• To store it, just pull the lever of the folding mechanism (3)
down and bend the handlebar tube until you hear a click.
the bottom of it.
imagen 2
• To unfold it, repeat the previous point in the opposite way.
Publicidad
