GBS Jolly line CWM-1737 Instrucciones De Montaje página 7

NOTE: Completely read the instruction sheet before beginning installa-
tion and assembly.
• Do not begin the installation of the product before having fully read
and understood the instructions and warnings contained in this manual.
In the case of doubt regarding any of these instructions or warnings,
please contact your local distributor.
• Please refer to the recommendations contained in the guide with
regard to the necessary distance from the wall so as to avoid the risk of
damaging material things.
• Ensure that the support surfaces are able to sustain the equipment, the
support bracket, and all of the components with the necessary safety.
• Never exceed the maximum support capacity.
• Tighten the screws without excessive screwing. Excessive screwing can
damage the components and considerably reduce the support capacity.
• This product is destined exclusively for indoor use. The use of this prod-
uct out in the open constitutes a serious risk of breakage and personal
injury.
•Screwdriver
•M6 nut wrench
•Electric drill with 10 mm bit for installation on concrete walls
•Marking pen
•Hammer
ENGLISH
WARNING
REQUIRED TOOLS
7