Publicidad
Idiomas disponibles
Idiomas disponibles
Bevel Cuts
What's a Bevel Cut?
A "bevel cut" is a cross-cut made with the blade
perpendicular to the fence (Fig. 49, 12) and with
the table (22) set at 0° miter. The blade can be
tilted to any angle within the saw's range: 47°
left and 47° right from the vertical.
The bevel scale is sized and positioned for easy
reading (Fig. 50, 10 and Fig. 51). The bevel lock
knob (Fig. 52, 34) is to lock and unlock the vari-
ous settings.
Fig. 50
Lock
nut
Bevel
stop bolt
33
22
Fig. 51
Watch while tilting to right
"30" position for
cutting 45° "spring
angle" crown molding
flat on table
16099221PH GCM18V-12SD OSI 20220506.indd 41
Saw Operations
Rotating bevel stop indicators (Fig. 50 and Fig.
52, 33) allow you to set the most common bevel
stops: 33.9°, 45° and 47° Left and Right (Fig.
51). The 33.9° bevel stop is for cutting 38°
"spring angle" crown molding flat on the table.
For more information, see "Compound Cuts" on
page 43.
Fig. 52
10
Bevel scale information
"33.9" positions are for cutting 38°
"spring angle" crown molding flat
on table
NOTE: Saw has a 33.9 detent
feature to automatically hold it at
this bevel angle setting
-41-
10
11
Watch while tilting to left
34
33
5/6/22 12:16 PM
Publicidad
