DeWalt D25810 Traducido De Las Instrucciones Originales página 18

EngLIsH
HEAVY-DUTY CHIPPING HAMMER
D25810, D25811
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
(U.K & Ireland only)
Type
Frequency
Power Input
No-load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Collar diameter
Weight (including handle)
Noise and vibration total values (triax vector sum) according to
EN IEC 62841-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN IEC 62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
16
WALT one of the
e
D25810 D25811
V 230
AC
V 230/115 230/115
AC
1
Hz 50
W 1050
bpm 3150
J 7.1
SDS max® 17mm-HEX
mm 76
kg 5.6
dB(A) 92
dB(A) 100
dB(A) 3
= m/s² 9.1
m/s² 1.5
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Chipping Hammer
D25810, D25811
D WALT declares that these products described under
230
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020
1
+A11:2020.
50
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15
1050
kg, Annex VIII, TÜV Rheinland LGA Products GmbH Tillystraße 2,
3150
90431 Nürnberg, Germany, Notified Body ID No.: 0197.
7.1
L (measured sound power level)
WA
L (guaranteed sound power level)
WA
76
These products also comply with Directive 2014/30/EU and
5.7
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
92
100
3
Markus Rompel
Vice President of Engineering PTE Europe
9.1
D WALT, Richard-Klinger-Straße 11,
e
1.5
65510, Idstein, Germany
30.12.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
Heavy-Duty Chipping Hammer
WALT declares that these products described under Technical
D
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020 +A11:2020.
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
REGULATIONS 2008
D25810, D25811
dB 100
dB 105
WALT at
e
WALT.
e