Publicidad
Idiomas disponibles
Idiomas disponibles
RC 828
DESCRIPTION OF CONTROLS
1.
9.
2.
4.
11.
1. Function selector: ON/OFF/AUTO/BUZZ; Radio or buzzer alarm
clock
2. TIME key, time setting
3. SLEEP key, programmed switching off
4. ALARM SET/OFFkey, alarm setting
5. HOUR key, hour setting
6. MINUTE key, minute setting
7. SNOOZE key, temporary stop
8. Tuning control
9. VOLUME control
10. Battery compartment
11. Alarm on indicator
SETUP
Plug the feeder cable in a 230V - 50Hz socket; the display will blink
until you finish setting the hour.
RADIO
-
To turn the radio on, switch the selector (1) ON.
-
Tune into the station you prefer by the tuning control (8).
-
Adjust the volume by the control (9).
CLOCK
Press TIME SET(2) and HOUR (5) keys simultaneously to set the
hour; TIME SET(2) and MINUTE (6) keys, to set the minutes. The
display will show the set hour/min.
ALARM CLOCK
Press ALARM SET/OFF(2) and HOUR (5) keys simultaneously to set
the alarm hour; ALARM SET(2) and MINUTE (6) keys to set the
minutes. By pressing the ALARM SET/OFFkey (2), the display will
show the alarm set time.
RADIO ALARM CLOCK
Tune in to the station you prefer.
After setting the alarm time, switch the selector (1) on AUTO and
the indicator (11) will light up. Adjust the volume as you prefer. The
radio will turn on at the time you set.
BUZZER ALARM CLOCK
7.
6.
5.
3.
10.
If you wish to set the buzzer alarm clock, switch the selector (1) on
AUTO, the indicator (11) will light up.
8.
12.
ALARM STOP
To stop the alarm (buzzer or radio), press the ALARM SET/OFF key
(4).
If you wish to stop the alarm temporarily, press the SNOOZE key (7);
the temporary stop goes on for 9 minutes, then the alarm starts
again. This operation can be repeated several time within one hour.
SLEEP FUNCTION
The SLEEP key (3) allows you to program the radio switching off
after max 1 hour and 59 minutes. While programming this function,
the radio must be on.
-
Position the selector (1) on OFF.
-
Program the switching off time by pressing the SLEEP (3) and
MINUTE (6) keys or the SLEEP (3) and HOUR (5) keys
simultaneously.
-
To disconnect the SLEEP function before the programmed time,
just press the SNOOZE key (7).
BLACKOUT BUFFER BATTERY
To keep any set data in the alarm clock even during a temporary
black-out, fit a 9V battery in the provided compartment (10) located
at the bottom of the appliance. We suggest you replace this battery
every 6 months. If during a black-out the display shows a wrong time
blinking, replace the 9V battery.
MAINTENANCE
Do not expose the appliance to rain or humidity, to prevent the
danger of electric shock or short circuit. Position the appliance at
safe distance from heating sources and avoid keeping it in damp or
dusty places. Do not expose to direct sunlight.
Unplug the appliance and remove the batteries whenever you are
not going to use it for a long time.
Clean the external surfaces of your appliance with a soft, slightly
damp cloth; absolutely avoid using solvents or abrasive substances.
TREVI follows a policy of ongoing research and development. The
products may therefore have features different from those described.
2
English
Publicidad
