Margules SF 220 Manual De Instrucciones página 14

FRONT PANEL: CONTROLS
ON / OFF
Power Switch
DIRECT PROCESS
Input Selector
CONTROLS:
ON / OFF Power Switch: Push the button to turn the SF 220 on and off. This button is also available on the remote control.
Input Selector Switch: Push button to select the input source between the 4 line in inputs and the direct input,
push once to advance between the inputs. The selector on the preamplifier is
sequential. This button is also available on the remote control, along with direct access
to a desired input.
If the unit is off, the SF220 will be turned on if any selector button is triggered.
Input Source Monitor: It displays the selected input source by means of an orange led.
Remote Control IR Receiver: The remote control is infrared, requires a visual line between the remote handheld unit and the
Volume Control Knob: With this knob, turning it to the right will increase the audio output level. Turn it to the left to decrease the
output level. Volume knob operation is available on the remote control. The remote-controlled
potentiometer is
Input Source
Monitor
SF220 preamplifier. Do not obstruct, because if it is blocked, the equipment will not receive the
signal from the remote control.
The remote handheld has several extra functions not available on the front panel.
powered by a motor, this devise is totally analog, and mechanical.
Volume
Control Knob
SF 220 30th EDITION
VOLUME
Remote
Control IR
Receiver
ENGLISH - 13