Programmed Play - Aiwa XC-37M Manual De Instrucciones

To cancel repeat play
Press the REPEAT button so that "
disappears.
NOTE
• During random play,
repeat only the current track.
• If the REPEAT button is pressed while the auto power off is in
operation, the auto power off is canceled.

PROGRAMMED PLAY

The CD player has a built-in memory function that allows play of
up to 32 memory banks over five discs in any order. Each of 32
memory banks can be one track or one whole disc.
1 Press the PRGM/CHECK button in stop mode.
PRGM in the display is surrounded by "
2 Press one of the DISC DIRECT PLAY(DISC 1-5)
buttons to select a disc.
If the disc number displayed on the window is the desired
disc to be programmed, skip step 2 and go to step 3 directly.
3 To set the program.
To program the whole disc, press the selected DISC
DIRECT PLAY(DISC 1-5) button again, the tracks numbers
on the music calendar flash for 6 seconds. Press the PRGM/
CHECK button within this 6 seconds to program.
" in the display
mode cannot be selected to
".
To program a track, press the numbered buttons and the +10
button.
Example:
To select the 12th track, press the +10 and 2 buttons.
To select the 20th track, press the +10, +10 and 0 buttons.
Selected track
Disc number number
Total number of
selected tracks
• r and t buttons can also be used to select a track by
pressing this buttons repeatedly and then press the PRGM/
CHECK button within 6 seconds to program this selected
track.
4 Repeat step 2 and 3 to program other tracks or
disc.
5 Press the ca button to start play.
To check the program
Each time the PRGM/CHECK button is pressed before playing, a
disc number, a track number, and a program number are displayed.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To delete a programmed track
Press the PRGM/CHECK button in stop mode to display the track
to be deleted, and then press the DELETE button on the main
unit.
To clear the program
Press the s button in stop mode, or press the zOPEN/CLOSE
button.
To check the amount of time remaining until the current
track finishes playing
Press the DISPLAY button during playing.
NOTE
• The DISC CHANGE, DISC SKIP and DISC DIRECT PLAY
buttons do not operate during programmed play.
• You cannot see the amount of time remaining of all programmed
tracks.
• If track 31 and above of a disc is programmed, the total playing
time of the selected tracks is not displayed.
• If the total playing time of the selected tracks is more than 99:59,
the display window will show -- : --.
• When the whole disc is programmed as one program track, the
tracks of this programmed disc cannot be played in random.
Program number
Total playing time of
the selected tracks
En
6
ENGLISH